Who Is Responsible for the DSEAR Risk Assessment?

You may well ask “Who Is Responsible for the DSEAR Risk Assessment?” The person who Is responsible for carrying out the DSEAR Risk Assessment for any workplace is a good question. One which may arise when a number of contractors, and sub-contractors operate on a site, where an explosion hazard is present which requires the provision of an assessment.

Who is Responsible?

Under ATEX, and the DSEAR Regulations in the UK. The owner is responsible for the compliance of all their installations and sites with the ATEX Directive, as implemented in the UK within the DSEAR Regulations.

It is assumed that the owner may, of course, delegate his responsibility for the work involved in preparing and maintaining the DSEAR regulations to another responsible person.


Not uncommonly the owner will now ask the following question:

What Can be Left Out from DSEAR Compliant Risk Assessments

For that reason, on this page we outline the scope of the actions needed to comply with these regulations.

The Following Can be Left Out from a Workplace DSEAR Risk Assessment

A clipboard can be useful for he person who Is responsible for the DSEAR Risk Assessment.It is not necessary to consider the following within ATEX/ DSEAR compliance reviews, or within the Explosion Protection Document:-

As permitted by the Regulations, maintenance can be considered as a separate issue and will be covered as necessary by Method Statements and Permits to Work, as appropriate and as part of the Operation and Maintenance Manuals.

Similarly, Health & Safety during construction is the responsibility of the Principal Contractor and Sub-Contractors as appropriate. The zones provided will therefore apply to normal operation, as is required by the regulations.

What it is Essential to Include in ATEX/ DSEAR Risk Assessments?

The DSEAR risk assessment undertaken for this purpose shall consider the following in the context of the normal operation of the plant:-

i. Prevent the formation of explosive atmospheres in the workplace
OR
Avoid the ignition of explosive atmospheres and Control the effects of explosions;

ii. Conduct a risk assessment covering:

● The likelihood of explosive atmospheres occurring and their persistence
● The likelihood of a source of ignition
● The effect of an ignition on plant, personnel and the environment;

iii. Classify the work place into Zones (or state that no hazardous zones exist in which case none of the further actions in this list apply);

iv. Marking of areas with signs at points of entry;

v. Maintenance of an explosion protection document including:-

● risk assessment and identification of zones
● area classification
● maintenance schedules
● documentation of requirements for training staff and instituting a system of permits to work;

vi. Select ATEX 100a compliant equipment according to intended zone.

Source: ATEX DSEAR Guidance HSE


You May Also Like These Topics...

Landfill Site DSEAR Risk Assessment and ATEX Directive Compliance

The following is an explanation of the requirements of the DSEA Regulations for Landfill Site DSEAR Risk Assessment, and what they mean for landfill site owners and operators. All landfill owners (and by delegation their operators) fall under this regulation, and must act in order to comply with Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) which have […]

Do you include lightning strikes, as shown here, in a DSEAR risk assessment?

DSEAR Risk Assessment – What is It, and When Must It be Done?

A DSEAR Risk Assessment is defined as “a Risk Assessment which assesses all the risks which are risks which fall within the scope of the UK’s DSEAR”. For those unfamiliar with DSEAR, the following extract from the UK governments HSE website defines the meaning of DSEAR: The DSEAR Explained The Dangerous Substances and Explosive Atmospheres […]

DSEAR Meaning? What is the Meaning of DSEAR? What are the DSEAR Regs?

The DSEAR meaning is very specific, and is easily defined. DSEAR (The Dangerous Substances and Explosive Atmospheres Regulations of 2002) is the United Kingdom’s implementation of the European Union-wide ATEX directive. The intention of the Regulation is to reduce the risk of a fatality or serious injury resulting from a “dangerous substance” igniting and potentially […]

Tags: , , , , , , , ,
Previous Post
ATEX and DSEAR experts discuss an Explosion Protection Document.
Blog

A Comprehensive Guide to ATEX Zone Classification

Next Post
Collecting the waste. A common duty for operatives and a Waste Management Industry Health and Safety Problem. - CC BY-NC-ND by harrypope
Blog

Waste Management Industry Health and Safety Problems – ATEX and DSEAR in Context

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.